ZERO GRAVITY Trampoline Tie Down Anchor Kit, Heavy Duty, Strong and Galvanised

Product Information

Augers Stakes– Augers are similar to wind stakes but have a corkscrew design that makes them more effective in soft soil. They are also made of galvanized steel and are driven into the ground using a mallet or hammer. Trampolines can withstand most minor winds. But what about high gusts or storms? It is important to know how to anchor a trampoline down to protect your investment. Strap or cable anchors: Versatile and straightforward to set up, strap or cable anchors involve attaching straps or cables from the trampoline frame to ground anchors. They are commonly used for larger trampolines. Disassemble the Trampoline (if possible): If you have enough advance notice of high winds, consider disassembling your trampoline. This is the safest option, as it eliminates the risk of it becoming airborne.

Once you have the trampoline frame adequately secured, that will prevent the trampoline from getting blown over. The likelihood of this happening is not just in areas where wind levels are high – if you live in a normally still area, light wind can still take away your trampoline. Weighing down the trampoline is very important. If you don’t weigh it down, the wind and rain could blow it over and damage your trampoline.Usually, one sandbag is put on a trampoline leg. But, the more sandbags you place on the trampoline the more stable the trampoline will be. You can tie the sandbags with legs using straps for a better result. Method 5: DIY Trampoline Anchor Step 3: Position each peg in the trampoline legs. Usually, each leg requires two wind stakes to hold down the trampoline in the earth. So, if the trampoline has 5 legs, you need at least ten pegs to ground the trampoline in place. You can also use these metal frames to hold down or secure netting or padding on an inflatable jumpy castle if you want it attached permanently to ground level Metal Frames to Keep the Trampoline in Place Metal Frame Tying down the trampoline in the earth with sandbags is one of the most effective ways to keep the trampoline in place in heavy wind. This is a very affordable way and needs less effort to hold down the trampoline. Therefore, if you live in a high wind area, it is a no-brainer that you need effective trampoline anchors. Anchoring down a trampoline will not only make it safe for the kids but also allow you to make the most of it, especially in high-wind areas.

A typical kit will include 4 adjustable straps and a steel auger. These kits are ideal for areas prone to storms and high winds, but they are also more expensive. Plant shrubs, trees, and flowers in your garden. You can use these as anchors for your trampoline. However, it is important that you do not plant anything too close to the trampoline as it will be dangerous. Conclusion Ans: Wind stakes and anchor kits are actually the same things that are used to ground down the trampoline during heavy winds. But there is a basic difference between their constructions. Auger-style anchor pegs provide a stronger grip to the ground and look much neater and tidier than sandbags. Make sure to choose the right type of anchor for the type of ground your trampoline will be on. b: Measure roughly 1-1.5 feet (0.30-0.46 m) inward from each leg

How to Anchor A Trampoline On Grass

Wood planks are easy to install, inexpensive, and durable and they protect the grass from damage. 9. Secure The Trampoline With Stakes And Pegs Made Of Steel

Although concrete is a much tougher surface to drill, it is still possible to fix screws or bolts into the concrete to keep your trampoline in place. Trampolines in gardens often have fences or barriers to help shelter them. Trees and hedges can provide some protection too. These natural or man-made barriers prevent wind from getting under the trampoline to lift it. When you don’t want to invest in trampoline pegs or a tie-down kit the sandbags will be a good option to secure the trampoline in the earth. Wind Stakes– Wind stakes are the most common type of trampoline anchor and are designed to be driven into the ground using a mallet or hammer. They are typically made of galvanized steel and come in a U-shape or spiral design. Use zip ties to attach the springs to the frame. For this method, cut two strips of duct tape long enough to go around each spring, then place them so that they overlap at one end by a few inches (about 5 cm).

Anchoring Your Trampoline on Concrete

Some kits may require specialized tools, so select one that you can install easily. 5. Step-by-Step Guide to Anchoring a Trampoline