The Flsun V400 is an extremely user-friendly Delta 3D printer. The 3D printer is characterized by extremely high printing speeds of up to 400 mm/s! This saves you over 70% of your normal printing time while creating high quality 3D prints! V400 motherboard doesn't support DFU mode, so it's not possible to install the firmware directly. It's therefore necessary to install it manually. The Flsun V400 is an extremely user-friendly Delta 3D printer. The 3D printer features extremely fast printing speeds of up to 600 mm/s and an acceleration of 10 000 mm/s². This saves you more than 70% of the usual printing time while still producing high-quality 3D prints. I also recommend using a microSD extension for future updates to avoid removing the cover each time.

Many 3D printers are equipped with a Bowden extruder because it ensures high printing speeds and, in contrast to a direct drive extruder, applies less weight to the moving hot end. But Flsun has created something unique with the V400: the hotend and the extruder have been combined, resulting in a particularly compact and lightweight system. They probably succeed in bringing one of the lightest and at the same time fastest direct-drive extruders onto the market! Egy frissítésnek köszönhetően a Flsun V400 nyomtatási sebessége 400 mm/s-ról hihetetlen 600 mm/s-ra nőtt! Get the firmware named Robin_nano35.bin in /home/pi/klipper/out/ directory (on the left part of MobaXterm). Firmware retraction gives an advantage compared to Slicer retraction, it can be modified during a print (from Mainsail or KlipperScreen) and therefore the same gcode can be printed with different parameters without the need to be re-sliced.There are two variants to choose from - one with the weight on the right-hand side and one with the weight on the left-hand side. The FLSun V400 is simple to use, fun to watch and can save you loads of time. I’ve used it a lot for prototyping parts for an RC car I’m building – in draft mode the printer can blaze through filament in a fraction of the time needed on a standard printer. The prints it produces at speed are still of excellent quality, so there’s no reason to limit it to only test prints. Our review copy of the FLSun V400 came with a copy of Ultimaker Cura 4.13.1 and one generic profile to get started. It also comes with the Moonraker plugin so it can connect the printer with your PC. The manual walks you through setting up the printer based on their previous model, the FLSun Super Racer. Start Gcode: START_PRINT BED_TEMP=[first_layer_bed_temperature] EXTRUDER_TEMP=[first_layer_temperature] The tool for adjusting the timing belt tension can also be used for the FLSUN Super Racer (SR), as the timing belt spacing is the same as for the V400. The measurement should be taken at mid-height, between the lower and upper bearing roller of the timing belt.

Motherboard Mount for Easy Access to microSd port: https://www.printables.com/model/268464-flsun-v400-motherboard-mount Adjust Z-OFFSET, first you need to move to Z=0 and then adjust nozzle position with a sheet of paper.

Inexpensive delta 3D printer with great features

The Cura Profiles were updated by following the details in THIS file and a new V400 added to Cura (this is V400 #2 on my system and has 600mm/s as the max speed.

To adjust manually Resonance Compensation, see here: https://www.klipper3d.org/Resonance_Compensation.html The V400 comes with Klipper firmware pre-installed. Klipper allows a first-class printing experience and ensures high user-friendliness - even via WiFi! Thanks to an update, the print speed of the Flsun V400 has gone up from 400 mm/s to an incredible 600 mm/s! Az Flsun V400 egy rendkívül felhasználóbarát Delta 3D-nyomtató. A 3D-nyomtatót rendkívül gyors, akár 600 mm/s nyomtatási sebesség jellemzi! Ezzel a szokásos nyomtatási idő több mint 70%-át takaríthatja meg, miközben kiváló minőségű 3D-nyomatokat készít! Note: Flashing the imager will reset all configurations and lose all data on your pad so ensure you have copies of anything you may want to keep.

A rendkívüli, 300 x 410 mm-es nyomtatási mérettel elképesztő nyomatok készíthetőek a legjobb minőségben! A V400 magas nyomtatási formátumokhoz is alkalmas! The correct toothed belt tension is indicated by a pointer that is vertical and parallel to the printer frame. In my case, this is achieved with 6 50 cent coins, i.e. 46.8 grams in weight. The FLSUN V400 user manual recommends adjusting the tension of the toothed belts every 2 months. But how can the toothed belt tension be measured reproducibly? i)And wait until the bar is fully charged and green, this may take several minutes (10/15 minutes)：