It is sometimes necessary to use a pair of long nosed pliers to pull the terminals fully forward before closing the red secondary locks. Micro Relay Plug Whilst you can use female spade terminals to collect to a relay, these relay bases or plugs make life a lot easier and neater.

Type Blaock Connectors These connectors are widely used in the motorcycle industry with higher current applications.

Waterproof 3-pin connector plug with an ingress protection rating of IP67 for use in harsh environments. Designed for easy installation in the field, these connectors are easy to assemble - only a soldering iron and wire cutters are required. Model TYP6602 - with screw terminals, three cable entries: one on the top (open), one on the bottom (closed), one on the bottom (closed), with cover for immersion protection, the housing is equipped with a screw-locking device and the wiring space is large. The more basic ones will work, but the ratchet tool is far nicer to use and well worth the extra few quid. Their sealing reliability under harsh conditions is well proven and they are especially suited for use in engine bay environments.

If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. Internal gaskets in the connector housing compress to fully seal around the cable as it exits the connector. The body is made from tough PBT and the copper contact pins are gold-plated to ensure a high quality, low resistance connection. Will usually dispatch within same working day if paid before 15:00 GMT (excludes weekends and holidays).Way AMP Econoseal J Series Connectors 6 way AMP waterproof Econoseal J series male and female connectors. This waterproof connector is Field Installable and creates a reliable, waterproof connection without any special tools or chemicals. Way AMP Econoseal J Series Connectors 2 way AMP waterproof Econoseal J series male and female connectors. A secondary lock ensures that the terminals are properly located (lock cannot be closed unless terminals are fully seated) and prevents them backing out of the housings.

It is suitable for use at 12V or 24V DC, has a maximum current rating of 20A and should be used with our panel-mounted, waterproof 3-pin connector socket (product code P02071). A hermetic electrical installation connector is a quick and easy way to connect or branch power cables (3mm - 12mm) ensuring tight installation (IP68). You simply strip back the insulation on each piece of wire and crimp the terminals to the wires and push them into the relevant block from the back. Assembly tip: The rubber cable seal should be crimped within the rear part of the terminal to retain it in the housing.A pair of industrial male and female connectors for sales, 3 pin, 16A of current and IP67 protection grade, 110V/ 230V/ 400V/ 500V voltages are available. Male tab and female receptacle terminals are crimped onto the cables and then inserted into the the connector housings. Available in a wide range of different types for various applications, wire connectors are an electrician's toolbox essential, often helping to reduce wiring time by up to 50%. They prevent plugging wire into the connector, 3pin waterproof connectors are a type of electrical connector that protects from water damage.