But with the release of the Unifi 6 Lite, I think that is about the change. Both have almost the same throughput, only the 5Ghz is a bit faster. But the advantage of the 6 Lite is that it supports WiFi 6 with OFDMA allowing it to handle more clients simultaneously. Every change of radio settings, whether they are 5GHz or only 2.4GHz, forces you to wait again "DFS Waiting" Write the OpenWrt sysupgrade image to the mtd partition labeled “kernel0”. Also verify the used partition device using /proc/mtd. The UniFi AC HD AP is the first UniFi 802.11ac Wave 2 AP. Combining the performance increases from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi AC HD AP delivers up to 125% greater performance* than a typical Wave 1 AP Below are some deployment examples. For optimal performance, useMU-MIMO clients. SU-MIMO clients will also benefit and gain up to 10-20% greater performance when used with the UniFi AC HD AP.

The testing device was MacBook Pro A1502 equipped with a built-in AirPort Extreme wireless card (Broadcom BCM4360 3x3, 1.3 Gbps PHY) working under 802.11a/b/g/n/ac standards. I made an updated version of this guide for 2022 and the Wi-Fi 6 UniFi AP models. The new version also has updated descriptions and advice. I will leave this old version up for now, but I’d recommend referring to the updated version going forward. Which UniFi Wireless Access Points You Should Buy For Your Network This is really your go-to access point for in-house usage. It’s affordable, small, and comes with excellent performance. It’s better to buy 2 lite models and spread them throughout the house than one long-range model. UniFi 6 Long Range – U6-LRUAP-AC-HD นั้น ผู้ใช้งานสามารถใช้งานผ่านแอปพลิเคชัน UniFi Controller ที่สามารถดาวน์โหลดได้ฟรีผ่านทางเว็บไซต์ของ Ubiquiti Networks ซึ่งช่วยให้ผู้ใช้งานสามารถจัดการและควบคุมอุปกรณ์ UniFi AP HD ได้ง่ายและสะดวกมากขึ้น รวมถึงมีฟีเจอร์การตั้งค่าและการจัดการเครือข่ายที่ใช้งานง่าย รวมถึงสามารถรายงานผลการใช้งานได้อย่างละเอียดและมีความสมบูรณ์

As of the latest firmware 3.7.45.6182, which rolled out recently, DFS channels are now officially supported. This includes 5GHz channels 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 and 144. The specification of the access point look great, and the mounting options are really versatile (desktop, wall, pole, and ceiling) When you look at the results of our tests, there is no doubt about it. Ubiquiti UniFI AP AC HD is the fastest and best UniFi access point. Generally speaking, if you have some experience with router or access point setup and want to cover your home or business with the fastest 802.11ac WiFi currently available, then UniFI AP AC HD is a reasonable option. However, if you only have 2x2 MIMO products or few clients using your network at the same time, the older access point AP AC PRO may be a better option for you. The twin product provides similar solutions for half the price. IMPORTANT: The UAP-AC-HD cannot be powered by the US-8 or US-8-60W; however, it can be powered by other UniFi PoE Switches that provide 802.3at PoE+ power.Here’s a look at the RF Environment scan option, which provides information about the RF channels that are available. This allows selection of the best possible channel with the least amount of interference. Location 2 is in the far end of a 1,500 sq ft two story, rectangular shaped house with the router/access point placed in one corner of the second floor and the client placed in one corner of the first floor. Total distance between the router/access point and client is approximately 40 feet with walls in-between. Results of performance testing are in the 5GHz band (if available) which provides maximum performance.

Another benefit of Wave 2 is that up to four spatial streams are available, and more channels can be bonded together. Both of those features help achieve higher speeds. Deciding if the added costs and abilities are worth it is up to you. Antenna Differences At Location 2, performance drops to 355Mbps, however, it’s still the fastest we’ve seen from any router/access point. Those who need to cover 1,500 to 2,000 sq. ft should have no issues with just a single UniFi AP AC HD. That being said, you do need clients that are capable of taking advantage of the level of performance offered by the UniFi AP AC HD. Aside from the latest Apple MacBook Pro, very few other client devices support 3×3 or 4×4 MIMO, so your real benefit is the access point’s ability to support lots of clients rather than being able to get the fastest single client performance. qdf_fs_read[54]: Fail to Open File /tmp/wifi1.caldataol_transfer_bin_file: flash cal data len 0 doesn't equal to 12064This model also requires 802.3at PoE+, so make sure you have a POE switch or power injector that is capable of that. It has two gigabit Ethernet ports. The 2nd can be used to bridge to another device, or combined into a 802.3ad-based link aggregation. ol_ath_pci_probe num_radios=1, wifi_radios[1].sc = d90c0480 wifi_radio_type = 2 subvendor = 0x0777 subdevice = 0xe5a2 This is the secure version of the Unifi HD. The main difference between the two is that the SHD is designed for secure areas, like hospitals and banks. The SHD is designed with a dedicated dual-band radio to constantly monitor and protect the wireless network traffic.